Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Replacement Dash VIN Swap

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Replacement Dash VIN Swap  Rate Topic 
AuthorPost
 Posted: 11-17-2018 06:40 pm
  PM Quote Reply
1st Post
noomg
Member
 

Joined: 08-02-2018
Location: Long Beach, California USA
Posts: 457
Status: 
Offline
This is an update to the previous dash swap topic. Since I'm getting a 502 Bad Gateway on any new topic I had to start a new thread. If you're fortunate to find a good replacement dash you'll need to swap the VIN plates. After you've got the old dash out it's easy to make the swap. Originally I thought the VIN plate was riveted to the dash, but it's not, it's held in place by split pins so if you're careful you can even reuse the original split pins.

Back To Top PM Quote Reply  

Current time is 06:15 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Replacement Dash VIN Swap Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems