| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Stainless Bumper | Rating: 
|
| Author | Post |
|---|
| Posted: 07-16-2014 04:50 pm |
|
1st Post |
|
Steve Johnson Member 
|
Looking for a front bumper for my 1974 Jensen Healey. I am located in Santa Ana, Ca. 92703 Have had car for 27 years now, just had a little thumper on freeway, and have had bumper to several shops and seems like no body wants to work on it. Thanks in advance for any help. Steve Johnson 1974 Jensen Healey MK11, 15469
|
||||||||||||||
| |||||||||||||||
| Posted: 07-16-2014 11:02 pm |
|
2nd Post |
|
answerman Member
|
This is a tough one. I talked to Delta about this a little while back and it appears that they can get new ones (assuming you're talking about the top stainless plate on the metal bumper) from England, but they are pricey (like ~$600). Finding a used one in good shape is pretty much the Holy Grail. I know I'd love to find one. Mine is somewhat crinkled up, and I talked to a shop about having them use an English wheel to smooth it out, but their take was it wasn't going to be much cheaper, and they probably weren't going to be able to get it perfect. It seems like a while back someone was trying to get a group together to split the tooling costs to have new ones made in quantity, but it didn't go anywhere.
|
|||||||||||||
| ||||||||||||||
| Posted: 07-17-2014 08:57 pm |
|
3rd Post |
|
Frank Schwartz Member
|
Hmmmm...I know of a local sheet metal shop...a really big insdustrial one, that will do small stuff, too. They made new stainless door sills for me and Bob Adams..and they are beautiful. I might take one of my old front bumper stainless parts to them and see what they will do for me..and the cost...but it will not be cheap as they would be made one at a time... should I ???
|
||||||||||||||
| |||||||||||||||
| Posted: 07-17-2014 09:14 pm |
|
4th Post |
|
answerman Member
|
Frank, I would be very interested. As I said earlier, the replacements from England are in the $600 range, so anything markedly less than that would be an improvement.
|
|||||||||||||
| ||||||||||||||
| Posted: 07-18-2014 01:06 am |
|
5th Post |
|
Art DeKneef Member
|
Steve, Do you need both pieces repaired or what? Got any pictures of the damage? Art Mesa, AZ
|
||||||||||||||
| |||||||||||||||
| Posted: 02-23-2015 05:30 am |
|
6th Post |
|
Randallclary@icloud.com Member
|
Have you had any luck. My front top stainless bumper top is near perfect and the rear is slightly imperfect. I would like to get mine in a little better condition before I complete the reassembly of the car. Otherwise I was looking at coming up with bumpers on the real. The silver paint job is beautiful on the car and the stainless polished up looks great against it. Call me and I can share some photos. I'm ready to send the car out to get the interior restored including the seats and all panels and carpeting. Would love some sources from you for that portion of my restoration. Randy Clary 909-938-2090 Last edited on 02-23-2015 05:31 am by Randallclary@icloud.com |
|||||||||||||
| ||||||||||||||
| Current time is 07:54 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Stainless Bumper | Top |
