| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Those little plastic thingys | Rating: 
|
| Author | Post |
|---|
| Posted: 03-25-2014 07:28 pm |
|
1st Post |
|
answerman Member
|
I'm sure there is a much more technical term for what I'm looking for. Starting the reassembly process and I am thinking I need to replace (probably lost a couple during disassembly) the little plastic tubes with the flared ends that the body badges push into. The deals that the pins on the side "J" badges push into which in turn push into the holes in the fenders. Same thing for the Jensen-Healey badge on the hood. I've never looked for anything like this before. Easily obtainable generic sort of thing?
|
||||||||||||||
| |||||||||||||||
| Posted: 03-26-2014 02:15 am |
|
2nd Post |
|
Art DeKneef Member
|
If you can't find a replacement you can think of doing what some car manufacturers do and use a double side tape. Some choices: http://www.shop3m.com/automotive-taping-and-masking/3m-scotch-mount-molding-tape-03615-7-8-in-x-5-ft.html http://www.shop3m.com/automotive-taping-and-masking/3m-super-strength-molding-tape-group.html
|
|||||||||||||
| ||||||||||||||
| Posted: 03-26-2014 09:22 am |
|
3rd Post |
|
Frank Schwartz Member
|
Come on, now, Jensenites...the parts you are talking about are in the parts book... They are called Push Fix...the ones for the side J badges are #67160 and 4 are required...the ones for the hood badge are #66830 and two are required. Try Delta and if they don't have them, try one of the two or three suppliers over in the UK
|
||||||||||||||
| |||||||||||||||
| Posted: 03-26-2014 05:06 pm |
|
4th Post |
|
answerman Member
|
Very cool. I didn't even think about them being a part Delta might have since they seem so insignificant. I guess I need to look at my Delta catalog more often.
|
|||||||||||||
| ||||||||||||||
| Current time is 09:02 pm | |
| > Jensen Healey & Jensen GT Tech > Body & interior stuff > Those little plastic thingys | Top |
