| ||||
Moderated by: Greg Fletcher |
|
Mk1 Windshield | Rating: |
Author | Post |
---|
Posted: 02-13-2012 03:51 pm |
|
1st Post |
Scottm5407 Member
|
Does anyone know if the windshield used on the Mk1 was unique to Jensen Healey, or was it also used in any other make of car ( Austin, Triumph, MG, Reliant, etc ?) Also, if I can find a used J-H one at a reasonable price that won't cost me a crazy amount for shipping,( bearing in mind that I am north of the 49th parallel and a border complete with customs officers etc. lies between me and the most likely sources ) did the original windshield change at all throughout the different iterations, or will any J-H windshield fit on any J-H ?? Thanks !!
|
||||||||||||||
|
Posted: 02-13-2012 03:56 pm |
|
2nd Post |
JodyKerr Member
|
The Jensen Healey windshield was specific to the vehicle. It was also used in some TVRs. It shouldn't be that hard to find one.
|
|||||||||||||
|
Posted: 02-14-2012 08:56 am |
|
3rd Post |
MikeIsotech Member
|
I've just had a new windshield fitted to my MK1. As far as I know they are the same as Mk2s. I looked at used windscreens and found two common problems, which is why I bought new. Firstly the wiper arms commonly scratch the glass leaving a visible line on the glass. Secondly, due to the age many of them were starting to de-laminate. If you fit a windshield, you don't want to do it again in a couple of years. A new screen in the UK was £300 ($450 ish), used ones were £150, not a huge saving. Mike
|
||||||||||||||
|
Posted: 02-14-2012 06:03 pm |
|
4th Post |
Scottm5407 Member
|
Appreciate the feedback..thanks ! Good point about new versus used. Does anyone know of a source for a new windshield in Canada or the US ??
|
|||||||||||||
|
Posted: 02-14-2012 09:07 pm |
|
5th Post |
chiromaster Member
|
Club Store http://www.jhps.com/mm5/merchant.mvc?Screen=PROD&Store_Code=Warehouse&Product_Code=90111&Category_Code=Body
|
||||||||||||||
|
Posted: 02-14-2012 09:13 pm |
|
6th Post |
Scottm5407 Member
|
Duh....now why didn't I think of that ? Thanks !!
|
|||||||||||||
|
Posted: 02-16-2012 01:52 am |
|
7th Post |
Besecker Member
|
The Club store recommends a professional installation...will a windshield shop typically do this or do you have to try a car restoration shop? Thanks.
|
||||||||||||||
|
Posted: 02-16-2012 09:04 am |
|
8th Post |
MikeIsotech Member
|
I had mine fitted by a regular windshield fitted, though he was familiar with older cars. If your old windshield is still in the car, I'd try getting off the padded header and stainless frame before you order a new one. The screws can be a pig to get out and it may take a while. Once they're off, it should be just like fitting any other bonded-in screen for the fitter. Mike
|
|||||||||||||
|
Posted: 02-16-2012 03:14 pm |
|
9th Post |
JodyKerr Member
|
Definitely have a professional install windshields. They are just too danged easy to screw up and/or break. Call your local glass shops and tell them exactly what you have. Generally just telling them it's a vintage british car is enough to scare off the ones that only do modern cars.
|
||||||||||||||
|
Posted: 02-16-2012 06:01 pm |
|
10th Post |
Brett Gibson JH5 20497 Member
|
And just a reminder those screws that hold the windshield in are NOT phillips head screws but Poz-Drive headed screws, you maybe get lucky and a phillips might get a few out but if you dont want to chance it get the right driver. McMaster-Carr / Grainger can supply them probably other places as well. Brett
|
|||||||||||||
|
Posted: 02-16-2013 09:09 pm |
|
11th Post |
rovohn Member
|
is the GT windshield the same as the roadster? John
|
||||||||||||||
|
Posted: 02-17-2013 03:38 am |
|
12th Post |
Sander Member
|
yes ...
|
|||||||||||||
|
Current time is 07:35 pm | |
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Mk1 Windshield | Top |