Wheel for spare tire. - Body & interior stuff - Jensen Healey & Jensen GT Tech -

Home

Not logged in - Login | Register

> Jensen Healey & Jensen GT Tech > Body & interior stuff > Wheel for spare tire.

Moderated by: Greg Fletcher

New Topic

Printer Friendly

Wheel for spare tire.

Rate Topic

Author	Post

Posted: 05-20-2008 09:53 pm

Quote

1^st Post

12371
Member

Joined:	09-22-2006
Location:
Posts:	17
Status:	Offline

Does anyone have a suggestion on a cheap wheel, perferably steel, I can use for a spare. I've got the original wheels but I don't want to hang one under the car as a spare and let it get slimed up.

Any suggestions?

Quote

Posted: 05-21-2008 03:49 am

Quote

2^nd Post

Mitch Ware
Member

Joined:	03-12-2005
Location:	Albany, New York USA
Posts:	204
Status:	Offline

a steel wheel from an mg midget would work as far as diameter and bolt pattern, not sure about the offset though.

Mitch Ware - #19670

Quote

Posted: 05-21-2008 02:28 pm

Quote

3^rd Post

12371
Member

Joined:	09-22-2006
Location:
Posts:	17
Status:	Offline

Thanks for the info. Hopefully it would never be used and if so for a very short distance. I'll check out the offset.

George

Quote

Posted: 05-21-2008 03:28 pm

Quote

4^th Post

colinw59
Member

Joined:	02-14-2006
Location:	Bloomfield/Hebron, Connecticut USA
Posts:	147
Status:	Offline

I replaced to OEM rims with four Superlites on #15851. For a spare, I used one of the OEM rims wrapped carefully in a large heavy duty black trash bag. I didn't want to spend hundreds of dollars of an invisible, and hopefully never used, spare. This has kept it clean and out of sight.

http://jhppg.com/gallery/74-Jensen-Healey-15851

Quote

Posted: 05-21-2008 04:20 pm

Quote

5^th Post

12371
Member

Joined:	09-22-2006
Location:
Posts:	17
Status:	Offline

I was hesitant to wrap it, afraid that moisture might get in. But unless I accidently get caught in the rain, this car sees no bad weather, this may be the easiest fix.

Thanks;

George
12371

Quote

Posted: 05-22-2008 03:18 am

Quote

6^th Post

Jensen Healey
Super Moderator

Joined:	03-11-2005
Location:	San Anselmo, California USA
Posts:	983
Status:	Offline

I imagine that plastic bag will find the hot exhaust someday.

Just put the wheel in there and forget about it. It's supposed to get dirty. If you actually need it you certainly won't care. Mine has the original tire on it! I had it out only once to fix some rust spots.

How will you check the air if it's in a plastic bag?

Some people put spare parts, fuel pumps and the like, inside the spare wheel, keeps the boot clear for other uses.

May all your Jensen problems be like this one,

Kurt

Quote

Posted: 05-29-2008 06:42 pm

Quote

7^th Post

pc
Member

Joined:	03-16-2005
Location:
Posts:	58
Status:	Offline

When using a spare that’s different from the rest of the wheels, be sure to carry the correct lug nuts for the spare.

The nuts for the factory alloys have a flat shoulder to seat flat on the wheel center section face. Steel wheels usually need a conical shouldered lug.

The Superlites on my car have hard steel inserts and use conical shouldered lugs. I still have the factory spare so I need to carry factory lugs to go with it.

PC.

Quote

Posted: 05-29-2008 07:52 pm

Quote

8^th Post

12371
Member

Joined:	09-22-2006
Location:
Posts:	17
Status:	Offline

Thanks for the reminder. I've got Chromodoras on mine which has the same lug nut as your Superlights.

I'm pretty sure I'm overthinking this spare wheel thing and I'll just use a stock wheel and pack a spare set of lugs.

G.H.

Quote

Current time is 06:04 am
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Wheel for spare tire.	Top