| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Engine on the subframe | Rate Topic |
| Author | Post |
|---|
| Posted: 12-11-2005 10:08 pm |
|
1st Post |
|
Harkes Member 
|
engine is on the subframe now! Forgive my enthusiasm but i feel like a little boy underneath the X-mas tree!! Erik, Netherlands http://jhppg.com/gallery/album109/Gearbox_conversion_010
|
||||||||||||||
| |||||||||||||||
| Posted: 12-11-2005 11:24 pm |
|
2nd Post |
|
Art DeKneef Member
|
What! Just one picture. Looks real nice. Art
|
|||||||||||||
| ||||||||||||||
| Posted: 12-12-2005 09:11 am |
|
3rd Post |
|
Harkes Member
|
.. i do have more on the jhppg... but since i've been posting so many i didn't dare mentioning it anymore.. LOL :)
|
||||||||||||||
| |||||||||||||||
| Posted: 12-12-2005 04:34 pm |
|
4th Post |
|
Mark Rosenbaum Member 
|
OOH! Shiny!
|
|||||||||||||
| ||||||||||||||
| Posted: 12-12-2005 05:38 pm |
|
5th Post |
|
Brett Gibson JH5 20497 Member
|
Erik, truly a thing of beauty, you should be proud of all you have done.............. One concern and I'm uncertain about the fact's, but your brake lines look to be of copper, and if thats the case I could swear that I read something at one point that copper was a no no for brake lines, are they copper ??? and does anyone have better info on this than my vague recollection's. I'd hate to see an issue and you are your lovely car have a shunt, without me at least mentioning it. Brett.
|
||||||||||||||
| |||||||||||||||
| Posted: 12-13-2005 09:28 am |
|
6th Post |
|
Harkes Member
|
Thanks for your concerns Brett and the compliments. my brakelines are copper/nickel. i have been talking to a number of classic car restorers and a race expert and they advice fitting copper/nickel brake lines. Just copper wouldn't work. they say they last a lifetime. Stainless steel is the other option, but harder to come by and more difficult to bend. anyone has more expertise than me on copper/nickel versus stainless steel brakelines?
|
|||||||||||||
| ||||||||||||||
| Posted: 12-13-2005 04:25 pm |
|
7th Post |
|
Mark Rosenbaum Member
|
The plated steel lines in common use are a bit stronger, as well as being less expensive, than the copper-nickel alloy brake lines that Eric appears to be using. If memory serves, the alloy type is slightly less susceptible to fatigue cracking. The bottom line is that both types are perfectly safe as long as they're replaced if visible corrosion is detected. It's my understanding that stainless steel brake lines are hard to fabricate and tend to be a bit brittle. Pure copper lines tend to rupture if used in brake systems, resulting in catastrophic failure. Last edited on 12-13-2005 04:27 pm by Mark Rosenbaum |
||||||||||||||
| |||||||||||||||
| Posted: 12-15-2005 03:34 pm |
|
8th Post |
|
Harkes Member
|
here is the info we've been looking for: http://web.dimebank.com/tech/BrakePlumbing.html cheers erik
|
|||||||||||||
| ||||||||||||||
| Current time is 06:17 am | |
| > Jensen Healey & Jensen GT Tech > Miscellaneous > Engine on the subframe | Top |
