 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-14-2005 |
| Location: | Davenport, Iowa USA |
| Posts: | 61 |
| Status: |
Offline
|
There are 12 nuts that you have to remove. You will need to take the wheel off to get to some of them. Also an assortment of extensions and swivels. Some are a real pain to get to. Be patient. When you get the nuts offf the studs(some studs will come out with the nuts) you will need to remove the steering shaft. It runs through the header. Loosen the bottom and the top clamps Then it should slide toward the firewall so you can take it off of the steering rack or toward the steering rack I don't remember for sure. When you get ready to put everything back together. I would suggest getting the studs and the undersized nuts from the club store. It makes it so much easier to put back together. It gives you just a liitle bit more clearance around the header.
Good luck, it is a pita job.
Ron Mau 16367