View single post by Jensenman
 Posted: 04-14-2009 12:22 am
PM Quote Reply Full Topic
Jensenman

 

Joined: 04-14-2005
Location: Columbia, South Carolina USA
Posts: 156
Status: 
Offline
 BTW, about the resistor: the control box should have +12V at all times. The ignition coil will vary; some require +6 volts regardless of the voltage supplied to the control box meaning the resistor is needed for the coil only. Some require +12V at all times, meaning no resistor. I'm running a 'Lucas Sports' coil with my Crane and it requires a resistor.