 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-12-2005 |
| Location: | Portland, OR |
| Posts: | 98 |
| Status: |
Offline
|
Gary
| View single post by Gary Martin JH 15371 | |||||||||||||
| Posted: 04-08-2009 12:01 am |
|
||||||||||||
Gary Martin JH 15371
|
Thanks everyone for the comments. I was initially checking the clearance with the lobes directly opposite the cam follower. I went back and rechecked, and I found that if I turn the lobes a few degrees past directly opposite the valve I gain another .015 to .02 in clearance! This puts me right in the .06 to .07 range for the intakes. The manual does not mention this. I just says to adjust on the heal of the cam lobe. Interesting. Gary
|
||||||||||||
|
| |||||||||||||