Gary Martin JH 15371
| Joined: | 03-12-2005 |
| Location: | Portland, OR |
| Posts: | 98 |
| Status: |
Offline
|
|
Ross, first I'd be sure you are turning it in the right direction. To loosen it would be counter clockwise looking at your picture. Be sure you have the right size socket, and use a 6 point socket for better grip. There should not be any locktite, but if they did use the medium strength blue locktite it should not be that hard to lossen. It could also be blue RTV. I'm not sure I would use any heat. If you did, I would only use a butane torch set low and gently heat around the plug, not the plug itself. Be carefull not to catch anything on fire. Good luck. Gary
|
