View single post by dthewlis
 Posted: 10-25-2008 03:19 pm
PM Quote Reply Full Topic
dthewlis

 

Joined: 10-01-2007
Location: Dow's Prairie, California USA
Posts: 72
Status: 
Offline
 We badly need an exploded illustration or a picture of the intermediate shaft assembly and housing (the shaft that drives the distributor).

On my car the shaft has a lot of play at one end and the housing is being damaged.  When we took the housing apart, we found the shaft with a gear (which has a washer and nut). But my mechanic believes there should be a thrust washer or something to hold the shaft in place so there isn't any play, and there isn't any such thing.

So we need to know what is supposed to be there.  We don't know if we are wrong, if the assembly was done incorrectly at some point in the past, if a missing washer has worn away...

If anyone can supply an exploded view, or a usable picture, I'd be delighted!  If a fax is easiest that's fine: to 415-946-3454.

Thanks very much!

Dave Thewlis