View single post by LambandAndy
 Posted: 05-06-2008 06:39 pm
PM Quote Reply Full Topic
LambandAndy



Joined: 10-21-2005
Location: Eastanollee, Georgia USA
Posts: 72
Status: 
Offline
The attached picture represents about four months of beating, pressing, grinding, cursing, painting, bead blasting, machining, wire brushing, swearing and waiting for the UPS guy to show up, not to mention a sizeable donation to both Delta and the Club Store.

Parts replaced/refurbished included front sub-frame (bent), all bushings front and rear, brake calipers and pistons, steering shaft knuckle (made my own bushings out of oil impregnated bronze), ball joints, shocks (KYB), brake lines and hoses, ...........

On Greg's scale of 1-4 vino's I'd rate this one at about 16 cases of Old Milwaukee's Best Ice!

If anyone else is getting into this maybe I can save you some of the frustrations I went through.  I did take a bunch of pictures that might be of use to someone.

Andy

#15223

 

Attachment: SANY0381c.jpg (Downloaded 853 times)