View single post by Ron Mau
 Posted: 04-14-2007 09:35 pm
PM Quote Reply Full Topic
Ron Mau

 

Joined: 03-14-2005
Location: Davenport, Iowa USA
Posts: 61
Status: 
Offline
 I finally figured out the real problem. The drivers door would open 42 inches (measured from the latch on the frame to the door) , the passenger door would open 31 inches. Yep you guessed it the door hinges are bent. They look like arches. So I went to the parts boxes and found a good set of hinges. The door is back on and clooses rather nicely. The gap on the front of the door looks a little larger than it should be . I think they may have taken out some of the fender or the door before to make it work. Guess I'll have to live with it.

Thanks for everyone's advice, it helped alot once the real problem was solved.

 

Ron Mau