View single post by Harkes

Posted: 11-20-2006 08:32 am

Joined:	03-17-2005
Location:	Warmond, Netherlands
Posts:	216
Status:	Offline

Gary was right about the white hard plastic seals at the sender unit...they do leak. Not much, but they do leak. I took the tank out, replaced it with the original rubber seal but then like Gary said it is not a tight fit. So i ordered a second rubber seal at Rejen Sales in the UK. Two rubbers are too thick, so i made the old one thinner.

I placed the new rubber seal between tank and sender unit. The second thinner rubber seal i placed between the sender unit and the locking ring. Tight fit! Tested the tank and it doesn't leak anymore.

Tank is back in the trunk. Rubber behind, underneath the tank and under the straps. The Aluminium tank itself is fine and light.

erik

Last edited on 11-20-2006 08:36 am by Harkes