View single post by Greg Fletcher
 Posted: 08-21-2006 05:50 pm
PM Quote Reply Full Topic
Greg Fletcher



Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
 You'll probably want to spend some time soaking those carb bodies once you have them apart. A sonic cleaning is best, but you can get by with some good quality carb dip. Those passages will be pretty mucked up and heavily varnished from years of sitting around. You might also need to figure some rejetting in your master plan as well since they never seemed to be just right for the engine you're putting them on.