View single post by Judson Manning
 Posted: 06-05-2006 01:48 am
PM Quote Reply Full Topic
Judson Manning



Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
 Does "When it gets hot" simply mean "after it's been run long enough to reach operating temp"?

In either case:  It's either spark or gas.

If spark, then you've got to find a loose wire.

If gas, then you've got to find where gas is getting restricted.  Number one for me over the years has been the fuel pump.  When the engine stalls, do you hear the pump ticking away?  If not, tap it with a hammer, it could be loose/old contacts.  If not the pump, look for junk in the carbs, lines, etc. restricting flow.