View single post by pbahr | |||||||||||||
Posted: 05-31-2006 04:31 am |
|
||||||||||||
pbahr
|
FWIW, my experience with YELODOG, which has: 11.1 Compression Ratio, 2.2 L, Electromotive (crank-fire ignition), larger Oil Cooler & other stuff is noted below. I have a 3 Qt Accusump with electric valve. Switch control from cockpit. Remote oil filter (big racing filter). Don't have any cranking problems with standard Starter Motor. Accusump is best investment I ever made (except, of course, the upgraded engine itself !). Depending on where you get the data, there is somewhere between 80% and 98% wear on an engine during start-up - this is major disagreement with Harkes. I always open the Accusump to the high pressure oil galley before I start the car. It also works great when I'm on the rqace track at Summit Point and others....... If you want to see the mounting arrangement, go to: http://shorpac.com/v-web/gallery/album62 That website also has all of the YELODOG goodies listed - just click on "Read YELODOG Upgrades*" (the upper center pix) and scroll down. . Of course, you have to design a piping arrangement, but I could help you with that. Bottom line: Install the 3qt. Accusump, you'll never regret it. Pete
|
||||||||||||
|