View single post by Mark Rosenbaum
 Posted: 01-12-2006 03:30 am
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 Assuming nothing is rusted in place, you can probably pull the gauge without removing the instrument pod.  The extra effort to pull the pod isn't all that great, however, and it's a good opportunity to make sure everything is tight, all the connections are clean and shiny, and replace the gauge lights.

For reference, I've attached a photo of the rear of the instrument pod, taken from an advertisement on eBay.

Attachment: dash - inst pod rear #2.jpg (Downloaded 69 times)