View single post by redracer
 Posted: 05-29-2024 09:53 pm
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 648
Status: 
Offline
 To JH12947: the adjustment is fairly easy although the screw may be somewhat "STIFF".
1) remove the long 1/4" bolt that holds the brake pressure differential switch(the aluminum piece about 10" in front of the MC) from the fender.
2)remove the 2 9/16" nuts that hold the MC to the booster
3) there should be enough "SLACK" in the MC and its brake lines to remove the MC from the booster to get at the adjustment screw
if you view my profile, you can get in touch by email, phone, or SKYPE
good luck, bruce/RedRacer