View single post by DonBurns
 Posted: 01-11-2022 05:45 pm
PM Quote Reply Full Topic
DonBurns

 

Joined: 09-18-2015
Location: Fullerton, California USA
Posts: 149
Status: 
Offline
 I had an odd issue with the starter not starting the first try, or sometimes starting after a 2-3 second delay. This was corrected by shorting the #11 to #12 wire on the "logic" box. Don't ask me why. This doesn't sound like your issue though, due to the grinding, which I was not experiencing. That sounds like solenoid not fully engaging.

If you need a new starter they are not available at your local auto parts store. The club store has rebuilt Lucas starters, but unless you care about absolute originality, consider a new Gustofson or WOSP starter (the former from Dave Bean) for about half the cost. Half the weight, half the size, twice the power for half the current draw. (or something like that) Depends on where you are located which is easiest to get, I think.

Or of course the issue could be something else.