 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 07-15-2013 |
| Location: | |
| Posts: | 203 |
| Status: |
Offline
|
Attachment: wheel studs.jpg (Downloaded 108 times)
| View single post by Tom Bradley | |||||||||||||
| Posted: 11-29-2021 02:08 am |
|
||||||||||||
Tom Bradley
|
Not sure if this helps, but many years ago I found some replacement aftermarket wheel bolts that worked. (See comparison pic). I measure slightly less than Bruce: 0.518"-ish on the outside. The flat part of the replacement bolt looks flush with the inside depth of the knurl and measures 0.494". Assuming that this was a standard size and not something weird, my guess is that the 0.507" sized bolts will likely work. Attachment: wheel studs.jpg (Downloaded 108 times)
|
||||||||||||
|
| |||||||||||||