View single post by Brett Gibson JH5 20497
 Posted: 04-28-2020 02:06 pm
PM Quote Reply Full Topic
Brett Gibson JH5 20497

 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
 Side Note, dry fit the head on the block with the gasket in place and make sure that the seal bead is not exposed, it runs around the perimeter of the gasket.
Should it be or if you just want a better seal satisfaction feeling, use Permatex brown gasket compound as well.
I ran into this issue with my install but luckily I had used the Permatex so all was well.

Brett.