View single post by redracer

Posted: 02-23-2020 02:03 am

Quote

Full Topic

redracer

Joined:	09-10-2012
Location:	BROOKHAVEN, Georgia USA
Posts:	654
Status:	Offline

thanks for the kind words, but I've probably done around a 100 or so, so I do have it "down" as one would say(have made a up a "shim" sheet for all the valves and have about 4000+ shims with a specially made numbered(1-8, EX & IN)wooden board to hold each shim in its designated valve.)
I'm sure you would get it down to that with a little more organizing.
The longest time is involved in CAREFULLY getting the old #504 or 518 off the cylinder head(the cam housing is not nearly as time consuming)