 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 09-17-2007 |
| Location: | San Francisco, California USA |
| Posts: | 221 |
| Status: |
Offline
|
The engine rotates clockwise(""CW"). Frankly, this is not that big of a job and again I would suggest enlisting the aid of someone locally.
I have degreed in a few cams years ago, thinking about it has brought back some memories. I even found my old degree wheel. If I found lobe centers, determined lift, and at least determined when valves were opening and closing, could I get a better idea of how these cams should be phased?
I have a dial indicator and the time, I also found some of Tim Engel's writings on the subject. Also found a pretty good writeup on a Lotus forum. But they all seem to start with a known cam.
As I understand it the venier adjustments on the pulleys are for fine tuning, is that correct?
Forgive my ignorance but this has already been very helpful!