View single post by noomg
 Posted: 09-09-2019 03:49 pm
PM Quote Reply Full Topic
noomg

 

Joined: 08-02-2018
Location: Long Beach, California USA
Posts: 451
Status: 
Offline
 Tim,

I'd say you're exactly right about the fuses. While doing a damage assessment of the wiring harness I noted that the #3 fuse had blown, I was surprised at the amount of damage since the fuse blew. After reading your post I realized what happened. At some time in the past the original #3 fuse had been replaced with a AGC 30 amp fuse, things must have gotten awfully hot before that fuse finally blew.

When I finally get things sorted out I'll replace all fuses with 15 amp fuses.