Rick in Miami
| Joined: | 02-17-2015 |
| Location: | |
| Posts: | 48 |
| Status: |
Offline
|
|
I finally got to play with the belt tension yesterday. I started by tightening the tensioner counter-clockwise to a tension that caused a whine when hot. Then I backed it off until there was no whine. After turning the cold engine over by hand several times this AM I got consistent Krikit readings of just barely above & barely below 50. I continued to turn the engine to 6-7 different positions testing several times at each position and got the same readings.
|
