View single post by qwerty
 Posted: 11-29-2016 09:10 am
PM Quote Reply Full Topic
qwerty



Joined: 10-01-2016
Location: Australia
Posts: 77
Status: 
Offline
 Jensen Healey Specific Manual Eccentric Hub.

AUD$125.00 + 40.00 Express Shipping for 4 - 6 Business days (tracked) ~ USD$125-135 including shipping depending on exchange rate and paypal fees as of 24 Jan 2017

Ditch the 2x 6005's, the tensioner shell and sloppy adjustment nut and allow replacement with the superior 1 piece Timing Belt Bearing SKF 414871A or the Flennor FS03299.

Either will fit this hub made especially for the Jensen Healey.
  • 4140 Alloy Steel
  • Full concentric abutment with spot face on the block increasing rigidity.
  • Full concentric abutment with spot face on the block reducing carving of block spot face upon multiple readjustments.
  • Centralized Adjustment nut allowing normal spanners.
  • Protruding hex to allow for easier spanner fit.
  • Hard shoulder while pressing in to avoid misalignment.
  • Easier to adjust tension.
  • Wider Roller over the Stock J-H Shell.
  • Reduced radial offset yet increased OD of roller to allow for less sensitive adjustment.
  • 24mm adjustment hex
  • Parts supplied: Tensioner Hub, High Tensile Nyloc and washer.
  • Bearing not included.
We have done a small batch of these. Please let me know if you are interested.

Attachment: Jensen Healey Eccentric Hub Tensioner 1.JPG (Downloaded 428 times)

Last edited on 01-24-2017 10:07 am by qwerty