View single post by Randallclary@icloud.com
 Posted: 02-28-2016 05:14 am
PM Quote Reply Full Topic
Randallclary@icloud.com

 

Joined: 10-04-2013
Location: Riverside, California USA
Posts: 111
Status: 
Offline
 Yes it does have to thread thru the exhaust. It is tight, but can me made to clear the headers. We finally had to make some bigger openings on the transmission rear support to allow more adjustment. We actually improved the allignment of the tail shaft and the transmission to differential and finally got a great fit.

The full turn of the steering wheel left to right gets the steering shaft within 1/16 of an inch. There is a fair amount of adjustment with the engine mounts. We got the engine fairly high up with the use of spacer washers. 1 on one side and 2 on the other. I don't remember which side has more spacers.