View single post by Mark Rosenbaum
 Posted: 08-17-2005 11:27 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 Don't have anything from SKF or Timken, but I do have some Quentin Hazell (QH) numbers, which I believe refer to kits for one wheel.  They are:
Prior to January 1974: QWB 118 C
Begin in January 1974: QWB 118 CL

Please note that I have not personally verified these part numbers.  Also, it's my understanding that while the bearings themselves are the same for all cars, the early cars used a completely different seal design that was superseded circa January 1974.  I'd presume (but do not know for certain) that the kits mentioned above would have the appropriate additional parts.

As an alternative, if you have a friendly Vauxhall dealer in your neighborhood, you can ask for inner bearing 6368762 and outer bearing 6368763.

Addendum.
Spotted an ad on eBay UK (item number 7993435684). The part numbers given there were:
Unipart -- GHK 1077
QH -- QWB 118C
SKF -- VKBA 512.

Not quite sure whether all of these numbers are for a single-wheel set, and based on the eBay photo the QH part number may be for a two-wheel set.  And once again, I have not personally verified these part numbers.

Last edited on 08-18-2005 12:33 am by Mark Rosenbaum