atgparker
|
Art, Thanks for the clarification on the pins and there location. I took liberty last night and made an aluminum plate. It is mounted to the studs which are part of the column and poke through the fire wall. This plate has a 5/8 hole in the middle and a bunch of urethane grease behind it! I then took a standard garden hose washer and backed it with some orings on the steering shaft. Then I put the splined u-joint back on and set the distance to buffet the o-rings just a tad. Now the steering columb stays put and I have a killer heat shield covering the bushing.
|
