 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 07-06-2010 |
| Location: | Mariposa, California USA |
| Posts: | 19 |
| Status: |
Offline
|
Thanks for the prompt reply. I have noticed that once it is reved up, no problem. I know that this setup can be made to work better because it used run perfect with the same setup. This is why I believe that it is related to the work I did on the carbs rather than something I have to live with due to carb size. FYI, I have 36mm barrels with effectively a Lotus Spec9 jetting, except my pump jets are 60 which is biggish compared to what others have. Also I have flat top cosworth 10:1 forged pistons.
I understand that the stroke length determines the volume of fuel delivered and the pump jet determines the time it takes to deliver it. I really think I need to figure out if they are all working the same, and then whether I am lean or rich. I have assumed lean, but that is only a guess.
Has anyone tried to measure the output of the pumps in any way? There is a chance that I goofed something up when rebuilding these, but I want to diagnose it without tearing them both apart again. the pump stuff is not easy to access.
Thanks,
Bob