| View single post by Brett Gibson JH5 20497 | |||||||||||||
| Posted: 06-12-2012 01:47 am |
|
||||||||||||
Brett Gibson JH5 20497
|
Another spot to have a look at besides what Jim mentions would be the bushing at the end of the column going thru the fire wall, Jensen used a plastic material that is basically junk and allows a lot of free play before the steering wheel responds, Delta sell's a bushing but there again they use plastic as well. best bet is to get one made from bronze and it will never wear out. To check the bushing reach up from under the car and move the steering shaft up and down side to side, it should be relatively tight with not much movement. Brett
|
||||||||||||
|
| |||||||||||||
