View single post by Mason Jones
 Posted: 02-26-2012 12:10 pm
PM Quote Reply Full Topic
Mason Jones



Joined: 06-03-2011
Location: Austin, Texas USA
Posts: 97
Status: 
Offline
 Mike,

Thanks for the link, very helpful! Nice to know what you're in for before getting everything apart.

Reading other posts here I see that there was a later intake manifold for the Strombergs that had larger ports. Of the 3 manifolds I have lying around 1 is that later design so I'll use that one.

I'm not sure how to tell if the pulleys on the 74 engine are the later aluminum alloy that is tougher. They seem a little less shiny than the 73's pulleys but could just be dirtier. The 73s are shiny and smooth whereas the 74s are very rough, even bumpy.

Mason