View single post by Panini
 Posted: 07-10-2005 03:57 pm
PM Quote Reply Full Topic
Panini



Joined: 06-10-2005
Location: Big "D", Texas USA
Posts: 19
Status: 
Offline
 With this ? you will see that even car idiots own JH's.

When I removed the distributor I may have moved thing. Like the car rolling forward and not physically marking the rotor.

Mark, did this after your post.

Am I wrong in thinking that the dist should slide in at the right point or just the opposite side. It was rough in one position, so I figured it might be at the opposite point. Could'nt get so I'm assuming it does not turn 180 and slip in.

Now, I can't get the starter to turn. It will if I do things like our own Texas rain dance. It will turn rough but not fire. Very rough. Then goes into some sort of dormant trance. Then will turn well but not fire. I guessed on the gap .020 but changed to .016.

Might do a little today