| View single post by Brett Gibson JH5 20497 | |||||||||||||
| Posted: 11-29-2010 07:04 pm |
|
||||||||||||
Brett Gibson JH5 20497
|
Gary, take the arm rest off, 2 screws, window crank, 1 screw, any stainless trim you might or might not have, and then from the bottom use a srew driver or flat blade scrapper and pry away from door, there are a bunch of plastic snaps that hold it in place that go along the bottom and both ends, the top has a lip you just lift the panel up and off. You will probably brake some of the snaps doing it, so save a good one and go to an auto upholstery place, they should have replacements or at lleast tell you were to get them. Brett
|
||||||||||||
|
| |||||||||||||
